Dash-mounted accessory rail installed on a Jeep Gladiator dashboard, featuring a black aluminum extrusion rail secured with custom carbon fiber–reinforced 3D printed brackets. An action camera is mounted on an adjustable arm above the dash, with a phone ball mount visible. The rail sits flush in the factory dash recess and provides stable mounting for driving and off-road use.

Jeep Gladiator Wrangler Dash Mount: Universal Accessory Rail with Pop Socket Mount

$89.00
$89.00
Skip to product information
Dash-mounted accessory rail installed on a Jeep Gladiator dashboard, featuring a black aluminum extrusion rail secured with custom carbon fiber–reinforced 3D printed brackets. An action camera is mounted on an adjustable arm above the dash, with a phone ball mount visible. The rail sits flush in the factory dash recess and provides stable mounting for driving and off-road use.
  • Dash-mounted accessory rail installed on a Jeep Gladiator dashboard, featuring a black aluminum extrusion rail secured with custom carbon fiber–reinforced 3D printed brackets. An action camera is mounted on an adjustable arm above the dash, with a phone ball mount visible. The rail sits flush in the factory dash recess and provides stable mounting for driving and off-road use.
  • Jeep Gladiator Wrangler Dash Mount: Universal Accessory Rail with Pop Socket Mount
  • Jeep dash accessory rail shown with included attachments mounted to the aluminum extrusion, including an action camera mount and an adjustable arm with PopSocket-compatible phone holder. The system is installed across the dashboard and demonstrates multiple mounting positions along the rail for phones and cameras.
  • Close-up view of the dash accessory rail mounted in the Jeep dashboard recess, highlighting the aluminum 2020 extrusion and custom 3D printed mounting base. The image shows the low-profile fit against the dash surface and the adjustable arm connection point used for accessory mounting.
  • Fully assembled dash accessory rail kit displayed on a workbench, including the aluminum extrusion rail, printed mounting blocks, adjustable arm, phone mount, and action camera mount. A digital caliper is visible for scale, showing the complete system arrives assembled and ready for vehicle installation.
  • Hands-on installation photo showing the dash accessory rail being positioned into the Jeep dashboard after removing the rubber dash mat. The rail aligns with factory screw locations and rests in the dash recess prior to tightening and adhesive curing.
  • Dash accessory rail shown from below on a workbench with visible mounting bases, indicating where RTV silicone adhesive must be applied during installation. The image communicates that adhesive is required for vibration resistance and is not included in the kit.
  • Dash-mounted accessory rail installed on the Jeep dashboard with alignment pins tightened into place. An Allen key is visible engaging the hardware, demonstrating final alignment and securing of the rail before allowing the adhesive to cure fully.
  • Dash accessory rail installed with an extended adjustable arm holding a phone mount, demonstrating arm length options. The image shows how the arm can be positioned and tightened, with guidance that heavier phones should use the shorter arm for increased stability.
  • Dash accessory rail installed on a Jeep dashboard with a note indicating incompatibility with the Wrangler 4xE model. The image shows the rail mounted in the dash recess with an action camera attached, clearly demonstrating the mounting location while communicating that this configuration does not fit hybrid Wrangler dashboards.
  • Jeep Gladiator parked on a forest trail with on-image text reading “Install concerns or need other accessories? Reach out, I’m happy to help.” The image represents Aetherium Innovations and highlights support for custom Jeep accessories, including 3D printed components, CNC machining, and prototype development for owners looking to add or modify dash-mounted accessories and vehicle-specific solutions.
  • Dash-mounted accessory rail installed on a Jeep Gladiator dashboard, featuring a black aluminum extrusion rail secured with custom carbon fiber–reinforced 3D printed brackets. An action camera is mounted on an adjustable arm above the dash, with a phone ball mount visible. The rail sits flush in the factory dash recess and provides stable mounting for driving and off-road use.
  • Jeep Gladiator Wrangler Dash Mount: Universal Accessory Rail with Pop Socket Mount
  • Jeep dash accessory rail shown with included attachments mounted to the aluminum extrusion, including an action camera mount and an adjustable arm with PopSocket-compatible phone holder. The system is installed across the dashboard and demonstrates multiple mounting positions along the rail for phones and cameras.
  • Close-up view of the dash accessory rail mounted in the Jeep dashboard recess, highlighting the aluminum 2020 extrusion and custom 3D printed mounting base. The image shows the low-profile fit against the dash surface and the adjustable arm connection point used for accessory mounting.
  • Fully assembled dash accessory rail kit displayed on a workbench, including the aluminum extrusion rail, printed mounting blocks, adjustable arm, phone mount, and action camera mount. A digital caliper is visible for scale, showing the complete system arrives assembled and ready for vehicle installation.
  • Hands-on installation photo showing the dash accessory rail being positioned into the Jeep dashboard after removing the rubber dash mat. The rail aligns with factory screw locations and rests in the dash recess prior to tightening and adhesive curing.
  • Dash accessory rail shown from below on a workbench with visible mounting bases, indicating where RTV silicone adhesive must be applied during installation. The image communicates that adhesive is required for vibration resistance and is not included in the kit.
  • Dash-mounted accessory rail installed on the Jeep dashboard with alignment pins tightened into place. An Allen key is visible engaging the hardware, demonstrating final alignment and securing of the rail before allowing the adhesive to cure fully.
  • Dash accessory rail installed with an extended adjustable arm holding a phone mount, demonstrating arm length options. The image shows how the arm can be positioned and tightened, with guidance that heavier phones should use the shorter arm for increased stability.
  • Dash accessory rail installed on a Jeep dashboard with a note indicating incompatibility with the Wrangler 4xE model. The image shows the rail mounted in the dash recess with an action camera attached, clearly demonstrating the mounting location while communicating that this configuration does not fit hybrid Wrangler dashboards.
  • Jeep Gladiator parked on a forest trail with on-image text reading “Install concerns or need other accessories? Reach out, I’m happy to help.” The image represents Aetherium Innovations and highlights support for custom Jeep accessories, including 3D printed components, CNC machining, and prototype development for owners looking to add or modify dash-mounted accessories and vehicle-specific solutions.
Jeep Gladiator Wrangler Dash Mount: Universal Accessory Rail with Pop Socket Mount

Jeep Gladiator Wrangler Dash Mount: Universal Accessory Rail with Pop Socket Mount

2 reviews

$89.00
$89.00

Tired of your phone rattling in your cup holder? If you run a phone with a PopSocket you already know how hard it is to find a dash mounting solution.

This modular dash accessory rail, is designed for the Jeep Gladiator and Wrangler. It mounts directly to the factory dash and utilizes a standard aluminum 2020 extrusion, providing a rigid rail that allows for creative customization for accessories.

The rail arrives fully assembled and installs with basic tools and requires no drilling. The mounting system combines screw pins with RTV silicone adhesive for a secure attachment once cured.

Tools required: (not included)
Metric allen key set
Silicone RTV adhesive

Install:
• Remove the rubber dash mat
• Remove the two factory dash screws
• Apply RTV adhesive to the mounting base and mounting holes
• Secure the rail hand-tight
• Allow adhesive to fully cure before use

for the modern Adventurer
Designed & Tested in the Pacific Northwest, USA.

Made with care

Great value

Elegant design

Quality materials

Details

This product is crafted with quality materials to ensure durability and performance. Designed with your convenience in mind, it seamlessly fits into your everyday life.
Shipping & Returns

We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.

We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.

Shop The Full Collection

Front view, Breakers in off position, Lithium Battery (not included) is plugged into, and solar is plugged into from the wanderer solar controller. Trim Color is Royal Blue Face Pattern is Carbon Fiber. Custom Color options available upon request. Texture finish instead of carbon fiber also available.

12V DC Breaker Box: Solar & Dual Battery Power Management

12V DC Breaker Box: Solar & Dual Battery Power Management
$69.00
$69.00
image features a jeep gladiator eco diesel with a super pacific x1 camper and awning set up in the rain. with led lights illuminating the surrounding camp site

12V LED Offroad Light Strip: Bug Resistant Camp Lighting

12V LED Offroad Light Strip: Bug Resistant Camp Lighting
$99.00
$99.00
3D Printable Pet Bowl Riser: Elevated Food & Water Stand (3mf Digital Files)

3D Printable Pet Bowl Riser: Elevated Food & Water Stand (3mf Digital Files)

3D Printable Pet Bowl Riser: Elevated Food & Water Stand (3mf Digital Files)
$1.99
$1.99
7075 aluminum round stock bar shown on a neutral gray background, CNC and lathe machining stock with smooth milled surface and flat-cut end grain. High-strength aerospace-grade aluminum alloy used for precision parts, fixtures, jigs, and mechanical components. Supplied as raw round bar stock, uncoated and ready for machining.

7075 Aluminum Round Stock – CNC & Lathe Machining Alloy - 100mm Long

7075 Aluminum Round Stock – CNC & Lathe Machining Alloy - 100mm Long
$18.00
$18.00