Five-inch Anderson Powerpole extension cable with red and black silicone-insulated wire, shown coiled neatly with matching connectors on both ends. This extension is intended for tight installations or spacing adjustments in modular DC power systems. On-image text reads “5 Foot Extension” and “message me for custom sizes.”

Anderson Adapter Cables: Daisy Power Systems - Diesel Heater, Fridge Freezer, Portable Power Station

Extension 5'
$22.00
$22.00
Skip to product information
Five-inch Anderson Powerpole extension cable with red and black silicone-insulated wire, shown coiled neatly with matching connectors on both ends. This extension is intended for tight installations or spacing adjustments in modular DC power systems. On-image text reads “5 Foot Extension” and “message me for custom sizes.”
  • Five-inch Anderson Powerpole extension cable with red and black silicone-insulated wire, shown coiled neatly with matching connectors on both ends. This extension is intended for tight installations or spacing adjustments in modular DC power systems. On-image text reads “5 Foot Extension” and “message me for custom sizes.”
  • Daisy Power Systems Anderson adapter cables installed inside an off-grid vehicle power setup, showing red and black DC cables connected to a portable power station and a mounted breaker panel. The image demonstrates how Anderson Powerpole adapter cables integrate accessories into a modular 12-volt DC power system. On-image text reads “Anderson Adapter Cables” and “Daisy Power Systems.”
  • Experimental portable wind turbine mounted on a rocky coastal hillside, shown as a conceptual power source for off-grid DC systems. This image represents system variation and prototyping context rather than a specific cable product. On-image text reads “Variations” and “Experimental Portable Turbine shown.”
  • Close-up of a two-foot Anderson Powerpole adapter cable with ring terminal ends, showing red and black fine-strand copper wire with heat-shrink-protected terminations. The image highlights terminal end options and cable flexibility for DC power connections. On-image text reads “Terminal Ends” and “2 ft long line.”
  • DC appliance power cable with an Anderson Powerpole connector on one end and a dual DC appliance plug on the other, coiled on a wooden surface. This adapter is shown for use with diesel heaters and portable fridge freezers, subject to appliance model compatibility. On-image text reads “DC Appliance” and “diesel heaters, fridge freezers (subject to model).”
  • Anderson Powerpole to DC barrel plug adapter cable used for charging portable power stations such as Goal Zero or Jackery units. The short cable is shown on a wooden surface with clearly visible connector types. On-image text reads “Power Bank Charger,” “Goal Zero etc,” and “Adapter about 1 ft long.”
  • Solar panel to Anderson Powerpole adapter cable with MC4-style solar connectors on one end and an Anderson Powerpole connector on the other. The red and black DC cable is shown coiled, indicating use for integrating solar panels into a Daisy Power Systems DC setup. On-image text reads “Solar to Anderson” and “Adapter about 2 ft long (message for custom length).”
  • Daisy Power Systems magnetic power distribution block mounted to a vertical surface, shown with Anderson Powerpole cables connected. The image demonstrates how adapter cables interface with “The Hub” for clean DC power distribution. On-image text reads “See store for more complementary products” and “The Hub – Magnetic Power Distribution Block.”
  • Aetherium Innovations brand image showing an off-road vehicle in a forest setting, representing real-world testing, custom prototyping, and support for off-grid power systems and accessories. This image reflects hands-on development and customer support for building custom DC power solutions. On-image text reads “Install Concerns? or need other accessories? reach out I’m happy to help.”
  • Five-inch Anderson Powerpole extension cable with red and black silicone-insulated wire, shown coiled neatly with matching connectors on both ends. This extension is intended for tight installations or spacing adjustments in modular DC power systems. On-image text reads “5 Foot Extension” and “message me for custom sizes.”
  • Daisy Power Systems Anderson adapter cables installed inside an off-grid vehicle power setup, showing red and black DC cables connected to a portable power station and a mounted breaker panel. The image demonstrates how Anderson Powerpole adapter cables integrate accessories into a modular 12-volt DC power system. On-image text reads “Anderson Adapter Cables” and “Daisy Power Systems.”
  • Experimental portable wind turbine mounted on a rocky coastal hillside, shown as a conceptual power source for off-grid DC systems. This image represents system variation and prototyping context rather than a specific cable product. On-image text reads “Variations” and “Experimental Portable Turbine shown.”
  • Close-up of a two-foot Anderson Powerpole adapter cable with ring terminal ends, showing red and black fine-strand copper wire with heat-shrink-protected terminations. The image highlights terminal end options and cable flexibility for DC power connections. On-image text reads “Terminal Ends” and “2 ft long line.”
  • DC appliance power cable with an Anderson Powerpole connector on one end and a dual DC appliance plug on the other, coiled on a wooden surface. This adapter is shown for use with diesel heaters and portable fridge freezers, subject to appliance model compatibility. On-image text reads “DC Appliance” and “diesel heaters, fridge freezers (subject to model).”
  • Anderson Powerpole to DC barrel plug adapter cable used for charging portable power stations such as Goal Zero or Jackery units. The short cable is shown on a wooden surface with clearly visible connector types. On-image text reads “Power Bank Charger,” “Goal Zero etc,” and “Adapter about 1 ft long.”
  • Solar panel to Anderson Powerpole adapter cable with MC4-style solar connectors on one end and an Anderson Powerpole connector on the other. The red and black DC cable is shown coiled, indicating use for integrating solar panels into a Daisy Power Systems DC setup. On-image text reads “Solar to Anderson” and “Adapter about 2 ft long (message for custom length).”
  • Daisy Power Systems magnetic power distribution block mounted to a vertical surface, shown with Anderson Powerpole cables connected. The image demonstrates how adapter cables interface with “The Hub” for clean DC power distribution. On-image text reads “See store for more complementary products” and “The Hub – Magnetic Power Distribution Block.”
  • Aetherium Innovations brand image showing an off-road vehicle in a forest setting, representing real-world testing, custom prototyping, and support for off-grid power systems and accessories. This image reflects hands-on development and customer support for building custom DC power solutions. On-image text reads “Install Concerns? or need other accessories? reach out I’m happy to help.”
Anderson Adapter Cables: Daisy Power Systems - Diesel Heater, Fridge Freezer, Portable Power Station

Anderson Adapter Cables: Daisy Power Systems - Diesel Heater, Fridge Freezer, Portable Power Station

3 reviews

$22.00
$22.00
Shipping calculated at checkout.
Cable Options

Made to order: 1-5 business days

Looking to change how you think about DC power distribution?
Most people already own heaters, lights, fans, fridges, or other DC-powered tools, each arriving with its own connector, cable length, or dedicated power bank. As you grow, those mismatches turn into clutter, resistance, and workarounds.

Rather than forcing every accessory to dictate its own plug, these cables let the system lead. Each option adapts a common device or power source into an Anderson-based setup, allowing accessories to be swapped, extended, or repositioned as your build evolves. The result is consolidation around a shared standard, making it easier to integrate power cleanly across a workshop, vehicle, or even your off-grid rig.

This listing offers individual Anderson Powerpole adapter cable options, selected at checkout:

• Anderson to Ring Terminals (2 ft)
• Anderson to DC Appliance Plug - Fridge/freezer, heaters, etc
• Anderson Extension Cable (5 ft)
• Anderson to DC barrel Adapter
• Solar to Anderson

Have a particular requirement not featured here?
Message me, Happy to support

For the modern adventurer.
Proudly developed and tested in the Pacific Northwest, USA.

Every order supports Aetherium Innovations and our mission to develop tools and technologies that lower the barriers in the skilled art trades.

Bench-tested

Modular by design

Direct builder support

Pacific Northwest built

Build & Support

Aetherium products are developed around real workshop and field workflows. If you need dimensions, compatibility guidance, replacement components, or help adapting this product to your setup, contact the workshop before ordering.
Shipping & Returns

The production estimate shown near the purchase button is the current working lead time for this item. Shipping is calculated at checkout.

If an order arrives damaged, does not match what you received approval for, or you need to request a return, contact us with the order number and photos when applicable. We will review the situation directly and help determine the right next step.

Complete the system

Why Aetherium

Built like someone has to use it.

We design around real workflows, direct feedback, and the belief that a good tool should expand what its owner can do.

Bench-testedDeveloped around real workshop problems, not trend forecasts.
Small-batchProduced deliberately with clear lead times and direct accountability.
AdaptableModular, repair-minded systems designed to evolve with the work.
Direct supportCompatibility question? You can talk to the person who built it.
Unsure whether this fits your setup?Send the workshop a photo or a short description before you order.
Ask a compatibility question