Dash-mounted accessory rail installed on a Jeep Gladiator dashboard, featuring a black aluminum extrusion rail secured with custom carbon fiber–reinforced 3D printed brackets. An action camera is mounted on an adjustable arm above the dash, with a phone ball mount visible. The rail sits flush in the factory dash recess and provides stable mounting for driving and off-road use.

Jeep Gladiator Wrangler Dash Mount: Universal Accessory Rail with Pop Socket Mount

$89.00
$89.00
Skip to product information
Dash-mounted accessory rail installed on a Jeep Gladiator dashboard, featuring a black aluminum extrusion rail secured with custom carbon fiber–reinforced 3D printed brackets. An action camera is mounted on an adjustable arm above the dash, with a phone ball mount visible. The rail sits flush in the factory dash recess and provides stable mounting for driving and off-road use.
  • Dash-mounted accessory rail installed on a Jeep Gladiator dashboard, featuring a black aluminum extrusion rail secured with custom carbon fiber–reinforced 3D printed brackets. An action camera is mounted on an adjustable arm above the dash, with a phone ball mount visible. The rail sits flush in the factory dash recess and provides stable mounting for driving and off-road use.
  • Jeep dash accessory rail shown with included attachments mounted to the aluminum extrusion, including an action camera mount and an adjustable arm with PopSocket-compatible phone holder. The system is installed across the dashboard and demonstrates multiple mounting positions along the rail for phones and cameras.
  • Close-up view of the dash accessory rail mounted in the Jeep dashboard recess, highlighting the aluminum 2020 extrusion and custom 3D printed mounting base. The image shows the low-profile fit against the dash surface and the adjustable arm connection point used for accessory mounting.
  • Fully assembled dash accessory rail kit displayed on a workbench, including the aluminum extrusion rail, printed mounting blocks, adjustable arm, phone mount, and action camera mount. A digital caliper is visible for scale, showing the complete system arrives assembled and ready for vehicle installation.
  • Hands-on installation photo showing the dash accessory rail being positioned into the Jeep dashboard after removing the rubber dash mat. The rail aligns with factory screw locations and rests in the dash recess prior to tightening and adhesive curing.
  • Dash accessory rail shown from below on a workbench with visible mounting bases, indicating where RTV silicone adhesive must be applied during installation. The image communicates that adhesive is required for vibration resistance and is not included in the kit.
  • Dash-mounted accessory rail installed on the Jeep dashboard with alignment pins tightened into place. An Allen key is visible engaging the hardware, demonstrating final alignment and securing of the rail before allowing the adhesive to cure fully.
  • Dash accessory rail installed with an extended adjustable arm holding a phone mount, demonstrating arm length options. The image shows how the arm can be positioned and tightened, with guidance that heavier phones should use the shorter arm for increased stability.
  • Dash accessory rail installed on a Jeep dashboard with a note indicating incompatibility with the Wrangler 4xE model. The image shows the rail mounted in the dash recess with an action camera attached, clearly demonstrating the mounting location while communicating that this configuration does not fit hybrid Wrangler dashboards.
  • Jeep Gladiator parked on a forest trail with on-image text reading “Install concerns or need other accessories? Reach out, I’m happy to help.” The image represents Aetherium Innovations and highlights support for custom Jeep accessories, including 3D printed components, CNC machining, and prototype development for owners looking to add or modify dash-mounted accessories and vehicle-specific solutions.
  • Dash-mounted accessory rail installed on a Jeep Gladiator dashboard, featuring a black aluminum extrusion rail secured with custom carbon fiber–reinforced 3D printed brackets. An action camera is mounted on an adjustable arm above the dash, with a phone ball mount visible. The rail sits flush in the factory dash recess and provides stable mounting for driving and off-road use.
  • Jeep dash accessory rail shown with included attachments mounted to the aluminum extrusion, including an action camera mount and an adjustable arm with PopSocket-compatible phone holder. The system is installed across the dashboard and demonstrates multiple mounting positions along the rail for phones and cameras.
  • Close-up view of the dash accessory rail mounted in the Jeep dashboard recess, highlighting the aluminum 2020 extrusion and custom 3D printed mounting base. The image shows the low-profile fit against the dash surface and the adjustable arm connection point used for accessory mounting.
  • Fully assembled dash accessory rail kit displayed on a workbench, including the aluminum extrusion rail, printed mounting blocks, adjustable arm, phone mount, and action camera mount. A digital caliper is visible for scale, showing the complete system arrives assembled and ready for vehicle installation.
  • Hands-on installation photo showing the dash accessory rail being positioned into the Jeep dashboard after removing the rubber dash mat. The rail aligns with factory screw locations and rests in the dash recess prior to tightening and adhesive curing.
  • Dash accessory rail shown from below on a workbench with visible mounting bases, indicating where RTV silicone adhesive must be applied during installation. The image communicates that adhesive is required for vibration resistance and is not included in the kit.
  • Dash-mounted accessory rail installed on the Jeep dashboard with alignment pins tightened into place. An Allen key is visible engaging the hardware, demonstrating final alignment and securing of the rail before allowing the adhesive to cure fully.
  • Dash accessory rail installed with an extended adjustable arm holding a phone mount, demonstrating arm length options. The image shows how the arm can be positioned and tightened, with guidance that heavier phones should use the shorter arm for increased stability.
  • Dash accessory rail installed on a Jeep dashboard with a note indicating incompatibility with the Wrangler 4xE model. The image shows the rail mounted in the dash recess with an action camera attached, clearly demonstrating the mounting location while communicating that this configuration does not fit hybrid Wrangler dashboards.
  • Jeep Gladiator parked on a forest trail with on-image text reading “Install concerns or need other accessories? Reach out, I’m happy to help.” The image represents Aetherium Innovations and highlights support for custom Jeep accessories, including 3D printed components, CNC machining, and prototype development for owners looking to add or modify dash-mounted accessories and vehicle-specific solutions.
Jeep Gladiator Wrangler Dash Mount: Universal Accessory Rail with Pop Socket Mount

Jeep Gladiator Wrangler Dash Mount: Universal Accessory Rail with Pop Socket Mount

2 reviews

$89.00
$89.00
Shipping calculated at checkout.

Made to order: 1-5 business days

Tired of your phone rattling in your cup holder? If you run a phone with a PopSocket you already know how hard it is to find a dash mounting solution.

This modular dash accessory rail, is designed for the Jeep Gladiator and Wrangler. It mounts directly to the factory dash and utilizes a standard aluminum 2020 extrusion, providing a rigid rail that allows for creative customization for accessories.

The rail arrives fully assembled and installs with basic tools and requires no drilling. The mounting system combines screw pins with RTV silicone adhesive for a secure attachment once cured.

Tools required: (not included)
Metric allen key set
Silicone RTV adhesive

Install:
• Remove the rubber dash mat
• Remove the two factory dash screws
• Apply RTV adhesive to the mounting base and mounting holes
• Secure the rail hand-tight
• Allow adhesive to fully cure before use

for the modern Adventurer
Designed & Tested in the Pacific Northwest, USA.

Bench-tested

Modular by design

Direct builder support

Pacific Northwest built

Build & Support

Aetherium products are developed around real workshop and field workflows. If you need dimensions, compatibility guidance, replacement components, or help adapting this product to your setup, contact the workshop before ordering.
Shipping & Returns

The production estimate shown near the purchase button is the current working lead time for this item. Shipping is calculated at checkout.

If an order arrives damaged, does not match what you received approval for, or you need to request a return, contact us with the order number and photos when applicable. We will review the situation directly and help determine the right next step.

Complete the system

Why Aetherium

Built like someone has to use it.

We design around real workflows, direct feedback, and the belief that a good tool should expand what its owner can do.

Bench-testedDeveloped around real workshop problems, not trend forecasts.
Small-batchProduced deliberately with clear lead times and direct accountability.
AdaptableModular, repair-minded systems designed to evolve with the work.
Direct supportCompatibility question? You can talk to the person who built it.
Unsure whether this fits your setup?Send the workshop a photo or a short description before you order.
Ask a compatibility question
  • 5 stars: 2 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
V
Valentin Pirovano

This is it! Awesome small business! Personal service, helpful and just a good lad! Can only recommend! 12/10

A
Aaron

Christian was great and sent hand written instructions. Solid product